Apple Watch SE (Nike, Global, 40 mm) Specs
Apple Watch SE – A2355 – MG013B/A
About this Apple Watch
The Apple Watch SE – Nike A2355 watch was introduced on September 15, 2020, to be sold globally (except in the United States, Canada, Mexico, and Puerto Rico). This unit features the same internal hardware as the Apple Watch SE A2355 but is more suitable for runners. An exclusive Nike watch face is a permanent feature that can launch a Nike-developed application automatically. The application can provide real-time data like distance traveled, calories burned, heart rate information, and the current map of the user’s run.
This watch does not have advanced health sensors like Series 6 (except heart rate sensors and notifications) and is a little slower. However, it can use an Internet connection and a connection to an iPhone 6 or later (with IOS14 or later) to perform some additional functions.
The A2355 has a 30% larger display and is up to twice as fast as the Apple Watch Series 3. Apple LTPO technology provides less power consumption while the display is turned on and is combined with an OLED screen which is also covered with Ion-X glass to enable scratch resistivity.
The touch-capable display has a Digital Crown with haptic feedback. It has flash memory storage of 32GB, and 1GB RAM is enabled for the user requirements. The battery life is generally estimated at 18 hours, but it usually depends on specific usage. The aluminum case comes with many options. Silver or space gray aluminum case comes with Black Nike Sport Band or customized combinations available from Apple if needed.
Apple S5
1 GB
32 GB
1.5-18 Hours
Storage & Memory
The Nike A2355 has 32GB of flash storage and 1GB of RAM.
Screen Size and Resolution
The 40 mm display has a 324 x 394 pixel resolution. The height is 40 mm, the width is 34 mm, and the depth is 10.7 mm. The weight is 30.68 g.
OS & Processor
The Apple Nike Watch Series SE comes with preinstalled Apple watchOS 7.0 for its operating system and is powered by a 64-bit dual-core Apple S5 processor, which has a system in package (SIP) architecture.
Battery
The Apple Nike Watch battery is a rechargeable Li-Ion battery that is expected to go for up to 18 hours overall, but it can be as low as 1.5 hours while using the talking option – connected to the iPhone.
Size and Weight
The height of this iPhone is 5.94 inches, the width is 2.98 inches, the depth is 0.33 inches and the weight is only 6.84 ounces.
Inclusive Features
- Digital Crown and Retina LTPO OLED touch capable display with haptic feedback
- Wireless Charging
- LTE and UMTS, Bluetooth 5.0 and WiFi 802.11 b/g/n 2.4 GHz
- Water resistant up to 50 meters of water
- GPS tracker
- Always-On Altimeter
- Gym kit
- Accelerometer and fall detection
- Emergency SOS with international emergency calling
- Compatibility with watchOS 7
- Magnetometer enabling the compass function
- Apple Pay
Introduction Date: September 15, 2020 |
Discontinued Date: September 7, 2022 |
||||||
Processors |
Memory |
||||||
Processors |
Dual Core |
Onboard RAM |
1 GB |
||||
Processor Speed |
N/A |
Storage |
|||||
Processor Type |
Apple S5 |
Capacity |
32 GB |
||||
Connectivity Details |
Song Capacity |
N/A |
|||||
USB Support |
N/A |
Photo Capacity |
N/A |
||||
FireWire Support |
N/A |
Description |
|||||
Standard Wireless |
802.11b/g/n 2.4 GHz |
Case Type |
Watch |
||||
Standard Bluetooth |
5.0 |
Form Factor |
Apple Watch SE (40 mm) |
||||
Cell Network |
N/A |
Housing Color |
Aluminum |
||||
Battery Details |
Controller |
Digital Crown |
|||||
Battery Type |
Lithium Ion |
Apple Order Number |
MG013B/A |
||||
Battery Life |
1.5-18 Hours |
Apple Subfamily |
Watch SE 40 mm |
||||
Stand by Time |
N/A |
Apple Model Number |
A2355 (EMC 3487) |
||||
Operating System and Display |
Model ID |
Watch5,11 |
|||||
Pre-installed OS |
watchOS 7.0 (18R382) |
Camera |
N/A |
||||
Maximum OS |
Current |
Dimensions |
1.57 x 1.34 x 0.41 |
||||
Built-in Display |
1.8″ OLED |
Average Weight |
1.08 ounces |
||||
Display Resolution |
324×394 |
Minimum iPhone Support |
N/A |