Apple iPhone 13 Pro Max (US/A2484) Specs

About this iPhone

The iPhone 13 Pro Max A2484 was introduced by Apple on September 14, 2021, and is designated to be sold in the US market. The new A15 Bionic chip was used in the iPhone 13 product line, and this 64-bit architecture and powerful chipset gave the A15 a significant advantage over its predecessor, the A14 (used in the iPhone 12). The same A15 chip is installed in the iPhone 13 Pro Max and is expected to share very similar technical specifications. The haptic touch display of the A2486 has a bigger screen, and the resolution is 2778 x 1284 pixels at 458 ppi.

The diagonal screen size is 6.7 inches compared to the 6.1 inches of the iPhone 13 Pro. It is the “Super Retina XR” OLED display with 120 Hz refresh capability (Promotion technology) and an adaptive refresh rate ranging from 10 Hz to 120 Hz, allowing it to have a 200 nit brighter display than the standard iPhone 13 in non-HDR mode.

The A2484’s internal memory is 6 GB, and for the storage flash memory, the user can choose from 128 GB, 256 GB, 512 GB, or 1 TB of RAM. The Dual SIM feature is present and works with either two active eSIMs or a nano-SIM and an eSIM. 

The unit has four cameras, except for the front camera; three cameras are at the rear. All cameras have a 12 MP resolution and can shoot 4K video. The front one has an aperture of f/2.2 and can achieve Portrait Lighting with six effects: Natural, Studio, Contour, Stage, Stage Mono, and High-Key Mono. The LIDAR sensor, mounted on the rear, rapidly increases the possibilities related to augmented reality usage (AR) or quality night or low-light shooting. Besides the front camera, the unit has three cameras on the rear, such as a Wide (f/1.5 aperture with sensor-shift optical image stabilization), Ultrawide (f/1.8 and 120-degree field of view), and Telephoto (f/2.8 aperture) camera. It can optically zoom in three times due to its telephoto lens and digitally zoom in 15x. The Cinematic mode for recording videos in 1080p at 30 cps can be performed with a shallow depth of field. HDR video with Dolby Vision can record up to 4K at 60 fps.

The iPhone 13 Pro has a stainless steel body, a ceramic shield on the front, and the back is made of glass. It is equipped to withstand water depths of up to 6 meters for 30 minutes and meets the IP68 standard. Also, the phone is splash and dust-resistant. There are five color options for the case: Sierra Blue, Graphite, Gold, Silver, and Alpine Green.

Inclusive Features

• Super Retina XDR haptic touch display with OLED and Promotion technology (adaptive refresh rate)
• Display resolution of 2778×1284 pixels, 458 ppi, and a 6.7″ diagonal size
• 12 MP Front camera supports Face identification, and Portraits with six lighting effects 
• 12MP rear camera system: Wide (f/1.6 aperture with “Sensor-shift OIS”), Ultra Wide (f/2.4 and 120-degree view angle), and Telephoto camera with f/2.8 aperture 
• All cameras have 12MP resolution and 4K videos capability
• Cinematic mode for video recording shallow depth of field, HDR with Dolby Vision up to 4K at 60 fps
• Supported video playback formats are H-264, HEVC, MPEG-4 Part 2, and Motion JPEG
• Enabled enhanced Optical image stabilization (OIS) and Dual optical image stabilization (Telephoto and Wide) 
• ProRes and Macro video recording,
• True Tone feature dynamically adjusts the white display balance
• Siri – FaceTime application support
• Slow motion video support
• Enhanced Night mode using LIDAR sensor
• Deep Fusion is available using pixel-by-pixel processing of photos,
• Smart HDR 4 optimizes front camera photography processing
• Wide color capture for photos and LivePhotos
• Red-eye correction
• Burst mode and quick take video
• Photo geotagging option
• Access to 5G and LTE networks
• Fingerprint-resistant oleophobic coating
• IP68 standard satisfied