Apple Watch Series 6 – MG173LL/A – Watch6,2 – A2292
About This Watch
The Apple Watch Series 6 features the same basic specifications as the Series 5 watch but with an updated dual-core Apple S6 processor, a new Always-On Altimeter, and a new Blood Oxygen sensor (SpO2). All Series 6 models have 32 GB of flash storage and up to 18 hours of battery life. This model does not support an independent cellular connection and will require to be tethered to an iPhone in order to access the internet. Higher-end Series 6 models do allow the devices to connect to the internet without the need for an iPhone tether.
The Nike Series of this watch is available in two options from Apple, Silver with a Pure Platinum/Black Nike Sport Band or Space Gray with an Anthracite/Black Nike Sport Band. Apple also allows users to customize their case and band combinations at the time of purchase.
Apple S6
1 GB
32 GB Flash Storage
18 Hours
Storage & Memory
The Apple Watch Series 6 has 32 GB of flash storage, Apple has yet to confirm the amount of RAM available for the device however reports have suggested 1 GB of RAM. These internal specifications match up to the previous Apple Series 5 Watch.
Screen Size and Resolution
This Apple Watch Series 6 has a 40 mm sized OLED display with strengthened Ion-X glass and a resolution of 324×394. This display is force touch-capable and the device features a haptic feedback Digital crown. As of the Series 5, the display also features an Always-On display allowing users to display a watch face even when not using the watch.
Inclusive Features
The Apple Watch includes the following features:
Force touch OLED display
Digital crown control piece with haptic feedback
Multiple wristband units
Heart-rate monitor
Electrical heart sensor (ECG)
Emergency heart-rate detection
Wireless Charging
Bluetooth
Water resistant
GPS tracker
A compass
Emergency calling feature
Blood Oxygen sensor (SpO2)
Always-On Altimeter
Processor
The Apple Watch Series 6 comes with Apple watchOS 7 for its operating system and is powered by a 64-bit dual-core Apple S6 processor which has an updated faster architecture than the previous S5 generation.
Battery
The Apple Watch Series 6 battery is expected to go for up to 18 hours overall but on the lower end, only 1.5 hours of talk time, 10 hours of audio and up to 6 hours of working out while using GPS. This matches the specifications of the previous model despite featuring the new Always-On Altimeter and Blood Oxygen sensor.
Introduction Date: September 15, 2020
Discontinued Date: October 8, 2021
Processors
Memory
Processors
1 (2 cores)
Onboard RAM
1 GB
Processor Speed
Pending
Storage
Processor Type
Apple S6
Capacity
32 GB
Connectivity Details
Song Capacity
N/A
USB Support
N/A
Photo Capacity
N/A
FireWire Support
N/A
Description
Standard Wireless
802.11b/g/n 2.4/5 GHz
Case Type
Watch
Standard Bluetooth
5.0
Form Factor
Apple Watch Series 6 (44 mm)
Cell Network
N/A
Housing Color
Aluminum
Battery Details
Controller
Digital Crown
Battery Type
Lithium Ion
Apple Order Number
MG173LL/A
Battery Life
1.5 – 18 hours
Apple Subfamily
Watch Series 6 44mm
Standby Time
N/A
Apple Model Number
A2292 (EMC 3480)
Operating System and Display
Model ID
Watch6,2
Pre-installed OS
WatchOS 7
Camera
None
Maximum OS
Current OS
Dimensions
44mmx38mmx10.4mm
Built-in Display
2.0 OLED
Average Weight
1.29 oz. (36.5g)
Display Resolution
368×448
Minimum iPhone Support
iPhone 6s
Identifier reference: MG173LL/A, A2292, EMC 3480. Use these together because one Apple identifier can sometimes cover multiple configurations.
Last reviewed by Techable:Identifiers checked: order number, A-number, EMC, and model identifier when available.
Related Apple specs
Explore more Apple Watch identifiers
Use these internal lookup paths to compare the family, year, chip, A-number, EMC, order number, and model identifier without relying on one identifier alone.
Apple A-numbers can cover more than one configuration. Compare the exact order number, EMC number, and model identifier before buying parts, shopping replacements, or quoting a device.